Starting and Powering Off

Starting

When you open a door to enter Model X, the instrument panel and touchscreen power on and you can operate all controls. To drive Model X:
  1. Press the brake pedal - Model X powers on and is ready to drive.
  2. Select a drive mode - move the drive stalk down for Drive or up for Reverse (see Shifting).
Informational PurposesAn informational icon, calling your attention
Note
If the PIN to Drive feature is enabled (see PIN to Drive), you must also enter a valid PIN on the touchscreen before you can drive Model X.
Informational PurposesAn informational icon, calling your attention
Note
If Passive Entry is off and you do not press the brake pedal to start Model X within approximately five minutes, a message displays on the instrument panel and you must use the key to lock then unlock Model X again before you can drive the vehicle.

Everything you need to know when driving Model X displays on the instrument panel.

Key Fob Not Inside

If Model X does not detect a key fob when you press the brake, the instrument panel displays a message telling you that a key fob is not inside.

If you receive this message, press the brake and place the key fob in the center console cup holder where Model X can best detect it.

Key fob on center console with arrow pointing to cup holder

If Model X still does not detect the key fob, try holding it against the center console, immediately below the low voltage power socket (see Low Voltage Power Socket). If the key fob is still not detected, remove the key fob's battery and try again. See Replacing the Key Fob Battery. Or try using another key fob. If another key fob does not work, contact Tesla.

A number of factors can affect whether Model X can detect the key fob. These include a low battery in the key fob, interference from other devices using radio signals, and objects between the key fob and receiver.

Always keep the key fob with you. After driving, the key fob is needed to restart Model X after it powers off. And when you leave Model X, you must bring the key fob with you to lock Model X, either manually or automatically.

Powering Off

When you finish driving, shift into Park by pressing the button on the end of the drive stalk. When you leave Model X with the key fob, it powers off automatically, turning off the instrument panel and touchscreen.

Model X also powers off automatically after being in Park for 30 minutes, even if you are sitting in the driver’s seat.

Although usually not needed, you can power off Model X while sitting in the driver’s seat, provided the vehicle is not moving. Touch Controls > Safety > Power Off. Model X automatically powers back on again if you press the brake pedal or touch the touchscreen.

Informational PurposesAn informational icon, calling your attention
Note
Model X automatically shifts into Park whenever it determines that you are exiting the vehicle (for example, the driver's seat belt is unbuckled and the vehicle is almost at a standstill). If you shift into Neutral, Model X shifts into Park when you open the door to exit. To keep Model X in Neutral, see Instructions for Transporters.

Power Cycling the Vehicle

You can power cycle Model X if it demonstrates unusual behavior or displays a nondescript alert.
Informational PurposesAn informational icon, calling your attention
Note
If the touchscreen is unresponsive or demonstrates unusual behavior, reboot it before you power cycle the vehicle (see Restarting the Touchscreen or Instrument Panel).
  1. Shift into Park.
  2. On the touchscreen, touch Controls > Safety > Power Off.
  3. Wait for at least two minutes without interacting with the vehicle. Do not open the doors, touch the brake pedal, touch the touchscreen, etc.
  4. After two minutes, press the brake pedal or open the door to wake the vehicle.