Traffic Light and Stop Sign Control
Traffic Light and Stop Sign Control is designed to recognize and respond to traffic lights and stop signs, slowing Model X to a stop when using Traffic-Aware cruise control or Autosteer . This feature uses the vehicle's forward-facing cameras, in addition to GPS data, and slows the car for all detected traffic lights, including green, blinking yellow, and off lights in addition to stop signs and some road markings. As Model X approaches an intersection, the instrument cluster displays a notification indicating the intention to slow down. You must confirm that you want to continue or Model X stops at the red line displayed on the instrument cluster's driving visualization.
Before Using
Before using Traffic Light and Stop Sign Control, you must:
- Ensure that forward-facing cameras are unobstructed (see Cleaning a Camera) and calibrated (see Drive to Calibrate Cameras). Traffic Light and Stop Sign Control depends on the ability of the cameras to detect traffic lights, stop signs, and road markings.
- Ensure that the latest version of maps has been downloaded to Model X. Although Traffic Light and Stop Sign Control primarily uses visual data received from the vehicle's cameras, greater accuracy is achieved when using the most recent map data. To check which version of maps is currently downloaded, touch . You must connect to a Wi-Fi network to receive updated maps (see Map Updates).
- Enable the feature. With the vehicle in Park, touch and then touch Traffic Light and Stop Sign Control. Once enabled, Traffic Light and Stop Sign Control operates whenever Traffic-Aware Cruise Control or Autosteer is active.
How it Works
When Traffic Light and Stop Sign Control is enabled and you are using Autosteer or Traffic-Aware Cruise Control, the instrument cluster displays a popup message to inform you that an upcoming traffic light, stop sign, or road marking has been detected. As it approaches the stop location, even at an intersection where the traffic light is green, Model X slows down and displays a red line to indicate where Model X will stop. To continue through the intersection—even if the traffic light is green —you must briefly press the accelerator pedal to give the vehicle permission to proceed. When you've confirmed that you want to proceed, the red stop line turns gray and Model X continues through the intersection and resumes your set cruising speed.
Traffic Light and Stop Sign Control is designed to operate as described only when the following conditions are met:
- Autosteer or Traffic-Aware Cruise Control is engaged.
- The cameras can detect an upcoming traffic light, stop sign or road marking (for example, cameras are unobstructed and have a clear line-of-sight to the traffic light, stop sign, or road marking).
- The instrument cluster on Model X is displaying an upcoming traffic light in "bold" format. Model X does not acknowledge traffic lights that the instrument cluster shows as faded. If a traffic light is not directly ahead of the camera (for example, it is located at an angle of the camera's view, or located in an adjacent lane) the instrument cluster displays it as faded and Model X does not slow down and stop for it.
Traffic Lights
When driving with Autosteer or Traffic-Aware Cruise Control engaged, and Traffic Light and Stop Sign Control enabled, Model X is designed to respond as follows when approaching intersections controlled by a traffic light:
| Type of Traffic Light | Vehicle Intended Response |
|---|---|
|
|
At a solid green traffic light, or at a traffic light that is currently off (not illuminated), Model X slows down. If you are following a car in front of you that continues through the intersection, the instrument cluster displays a green stop line and provided your hands are detected on the steering yoke (or steering wheel), Model X also continues. If a car is not in front of you, the instrument cluster displays a red stop line. You must confirm that you want to continue through the intersection by briefly pressing the accelerator pedal. If you don’t confirm, Model X stops at the red stop line displayed on the instrument cluster. Note
Model X resumes the
set cruising speed when it continues through the intersection, taking
into consideration the speed of a vehicle in front of you. |
|
|
Model X slows down and comes to a complete stop at the red stop line displayed on the instrument cluster. When you want to continue through the intersection (for example, the light turns green again, or once Model X has come to a complete stop), you must briefly press the accelerator pedal. |
|
|
Model X slows down and
comes to a complete stop at the red stop line displayed on the instrument cluster. When you want to
proceed through the intersection (for example, the light turns green
again), you must briefly press the accelerator pedal. Note If the traffic light
changes after
you've confirmed that you want to proceed (for example, a green
traffic light turns yellow), Model X may stop
instead of continuing, especially if Model X determines
that it can safely stop before entering the intersection. Note Model X is not
designed to proceed through an intersection when the traffic light is
red or if the light turns yellow in situations when there is adequate
distance to safely stop before entering the intersection. Note You can take over
driving at any time by manually braking to cancel
Autosteer
or
Traffic-Aware Cruise Control. |
|
|
Model X slows down. To
proceed, you must briefly press the accelerator pedal. If you don’t, Model X stops at the red
stop line displayed on the instrument cluster. Note To prevent Model X from stopping,
and to minimize how much it slows down as it approaches, you can
confirm that you want to proceed by briefly pressing the accelerator pedal at any time after the instrument cluster displays the
red stop line. Model X resumes your
set cruising speed immediately after you confirm (taking into
consideration the speed of a vehicle in front of you). Warning Approach
attentively and be prepared to press the brake pedal to slow down or
stop. |
| Model X slows down and comes to a complete stop at the red stop line displayed on the instrument cluster. When you want to proceed through the intersection (for example, traffic laws and conditions indicate it is safe and legal to proceed), you must briefly press the accelerator pedal. |
Stop Signs and Road Markings
When driving with Autosteer or Traffic-Aware Cruise Control engaged, and Traffic Light and Stop Sign Control enabled, Model X is designed to respond as follows when approaching intersections controlled by stop signs, stop lines, or road markings:
| Type of Intersection | Vehicle Intended Response | |
|---|---|---|
|
No Traffic Control Arm of T-junction |
Model X assumes the right of way and continues straight without slowing down or stopping. | |
|
End of T-junction |
If Model X detects a
T-junction based on the map data, Model X slows down and
comes to a complete stop at the red stop line displayed on the instrument cluster. When you want to
proceed, you must take over steering and acceleration. Warning Model X may not stop
at a T-junction that does not have a stop sign or stop line, or if the
T-junction is not included in the map data. Drive attentively and be
prepared to stop (when necessary and/or appropriate). |
|
|
Stop Sign Stop Sign and Road Marking Road Marking |
Model X slows down and
comes to a complete stop at the red stop line displayed on the instrument cluster. When you want to
proceed through the intersection, you must briefly press the accelerator pedal. Note If you confirm that you
want to proceed through an intersection controlled by a stop sign by
briefly pressing the accelerator pedal before Model X has stopped,
your confirmation is ignored. Model X is not
designed to proceed through a stop sign without stopping. Note Even when using
Autosteer
, and even if you have engaged a turn signal, you must turn
the steering yoke (or
steering wheel) yourself
(which cancels
Autosteer
) to complete a turn at an
intersection. |
|
Limitations
Depending on many different circumstances and environmental conditions, Traffic Light and Stop Sign Controlmay or may not stop at:
- Railroad crossings.
- Keep-out zones.
- Toll booths.
- Roundabouts.
- Crosswalk systems.
- Yield signs or temporary traffic lights and stop signs (such as at construction areas).
- Miscellaneous traffic U-turn lights, bicycle and pedestrian crossing lights, lane availability lights, etc.
In addition, Traffic Light and Stop Sign Control is particularly unlikely to operate as intended, can disengage, or may not operate, when one or more of the following conditions are present:
- Driving through consecutive light-controlled intersections that are very close to each other.
- Visibility is poor (heavy rain, snow, fog, etc.) or weather conditions are interfering with camera or sensor operation.
- Bright light (such as direct sunlight) is interfering with the view of the camera(s).
- A camera is obstructed, covered, damaged, or not properly calibrated.
- Driving on a hill or on a road that has sharp curves on which the cameras are unable to see upcoming traffic lights or stop signs.
- A traffic light, stop sign, or road marking is obstructed (for example, a tree, a large vehicle, etc.).
- Model X is being driven very close to a vehicle in front of it, which is blocking the view of a camera.