Rear Trunk
Opening
To open the rear trunk, ensure Model Y is in Park, then do one of the following:
- Touch the associated button on the touchscreen.
- Double-click the rear trunk button on the key fob.
- Touch the rear trunk button on the mobile app.
- Press the switch located under the liftgate's exterior handle (a valid key must be detected).
Model Y must be unlocked or detect a key before you can use the switch to open the liftgate.
![Rear of vehicle with zoombox showing detail of the switch on the liftgate exterior handle](../../images/GUID-1255E499-DC03-4752-9B4E-B29ECF6B2030-online-en-US.png)
To stop a liftgate while it is moving, single-click the rear trunk button on the key fob. Then, when you double-click the rear trunk button, it moves again, but in the opposite direction (provided it was not almost entirely open or closed when you stopped it). For example, if you single-click to stop the liftgate while opening, when you double-click, it closes.
A low voltage power socket is located on the left side of the rear trunk.
![low voltage power socket located on the left side of the rear trunk.](../../images/GUID-3DE94883-C3B1-44A5-9D00-79D004732127-online-en-US.png)
Adjusting Liftgate Opening Height
You can adjust the opening height of the liftgate to make it easier to reach or to avoid low-hanging ceilings or objects (for example, a garage door or light):
- Open the trunk, then manually lower or raise the liftgate to the desired opening height.
- Press and hold the button on the underside of the liftgate for three seconds until you hear a confirmation chime.
- Confirm that you have set it to the desired height by closing the liftgate, then reopening it.
Closing
To close the liftgate, do one of the following:
- Touch the associated button on the touchscreen.
- Double-click the rear trunk button on the key fob.
- Press the switch located on the underside of the liftgate
If the liftgate senses an obstruction when closing, it stops moving and chimes two times. Remove the obstruction and try closing it again.
Parcel Shelf (if equipped)
The parcel shelf covers the rear cargo and is useful when you want to conceal valuables, keep the sun away from groceries, or minimize noise from rustling objects. To fold the shelf in, hold the circular panel and slide the shelf back toward the rear seat. Fold the circular panel on top of the folded parcel shelf. To unfold, flip over the circular panel and slide the shelf toward you until it straightens out.
To remove, fold the back panel and lift the parcel shelf upward with your hand underneath the bottom of the shelf to disengage the tabs and magnets in the front corners. Then slide the parcel shelf out.
Accessing the Cargo Area
Rear Trunk Load Limits
Distribute the weight of cargo as evenly as possible between the front and rear trunks.