Acceleration Modes

Touch Controls > Pedals & Steering > Acceleration to choose a preferred acceleration mode:

  • Chill limits acceleration for a slightly smoother and gentler ride.
    Informational PurposesAn informational icon, calling your attention
    Note
    When Chill is selected, Chill displays on the instrument panel, above the driving speed.
  • Sport provides the normal level of acceleration.
  • Insane (called Plaid on performance vehicles, if equipped) provides the maximum level of acceleration immediately available.
    Informational PurposesAn informational icon, calling your attention
    Note
    Using the increased torque and power available in Insane or Plaid mode can reduce range and efficiency.
    Informational PurposesAn informational icon, calling your attention
    Note
    Insane or Plaid strives to keep the Battery within an optimal temperature range. In addition to heating the Battery, these settings also cool the Battery when necessary (for example, while driving at high speeds, during rapid acceleration, driving for long periods, etc.).
Informational PurposesAn informational icon, calling your attention
Note
You can improve the efficiency of the cabin heating by reducing your selected acceleration mode. This allows the heat pump system to take more heat from the Battery to efficiently heat the cabin, instead of maintaining the Battery's ability to provide peak acceleration performance. This helps to maximize driving efficiency in colder weather. Note that when subsequently increasing the acceleration mode, the Battery requires time to warm up before the increased level of acceleration is available.

In addition, Model X features Drag Strip Mode. Using Drag Strip Mode to precondition your Model X is useful before a short distance race.

Drag Strip Mode

Drag Strip Mode preconditions the Battery and drive unit to ideal operating temperatures for timed acceleration. Model X stays in Drag Strip Mode for three hours, even if you leave the vehicle. After three hours, the feature times out to prevent unnecessary energy consumption (for example, you leave the vehicle and forget to cancel Drag Strip Mode).

When using Drag Strip Mode, Model X consumes more energy to keep the Battery within an optimal temperature range.

Cancel Drag Strip Mode at any time by toggling Drag Strip Mode off.

Informational PurposesAn informational icon, calling your attention
Note
Drag Strip Mode automatically disables Slip Start when enabled.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Drag Strip Mode is designed for use on closed circuit driving courses only. It is the driver’s responsibility to ensure that driving style and acceleration do not endanger or inconvenience other road users.

How to Launch the Vehicle

The touchscreen provides visual instructions on how to launch:

  1. Touch Controls > Pedals & Steering > Drag Strip Mode.
  2. Wait for the instrument panel to indicate that the vehicle is Peak Performance Ready.
  3. With Model X shifted into Drive and at a complete stop, firmly hold the brake pedal with your left foot, then fully press the accelerator pedal.
  4. Once step 3 is complete, the front suspension begins lowering into a "cheetah stance".
  5. Wait for the instrument panel to indicate that Drag Strip Mode is Ready to Launch.
  6. Once you see "Cheetah Stance Enabled" and "Ready to launch" on the instrument panel, release the brake pedal to launch the vehicle.