Autopark
Note
Depending on date of manufacture, software
version, and vehicle configuration, your vehicle may not be equipped with the
following features, or a feature may not operate exactly as described.
Autopark uses data to simplify parking on public roads by maneuvering Cybertruck into parallel and perpendicular parking spaces.
Warning
It is your
responsibility to familiarize yourself with the limitations of Autopark and the
situations in which it may not work as expected. For more information, see Limitations and Warnings.
CAUTION
Do not use Autopark if anything, such as a ball hitch, bike rack, or
trailer, is attached to the tow hitch. Do not use Autopark if there is cargo overhanging
past the end of the cargo bed (such a long slats of wood, poles,
pipes, etc.).
Autopark is disabled when:
- A bicycle is detected.
- The tailgate is down.
- Cybertruck is in Trailer Mode (see Trailer Mode).
- Cybertruck is in Off-Road Mode (see Off-Road Modes).
CAUTION
Autopark's performance
depends on the ability of the cameras to determine the vehicle's proximity to curbs,
objects, and other vehicles. Ensure all cameras are clean and free of obstructions
before each drive and before using Autopilot features (see Cleaning a Camera). Dirty cameras as well as
environmental conditions such as rain and faded lane markings, can affect Autopilot
performance. If a camera is obstructed or blinded, Cybertruck displays a message on the touchscreen and Autopilot features may not be
available.
Parameters
Autopark detects potential parking spaces based on the following parameters:
Perpendicular Parking
- Your driving speed must be below 8 mph (13 km/h). If driving too fast, Autopark may not be able to accurately detect your desired parking space.
- The parking space must be at least as wide as your vehicle.
- The parking space must have at least three visible lines for the vehicle to park into, such as parking lines, road markings, or distinct curbs. Autopark may not work in a garage, for example, without three visible parking lines.
- Autopark may not work with textured road surfaces such as cobblestone or brick.
Parallel Parking
- Your driving speed must be below 8 mph (13 km/h). If driving too fast, Autopark may not be able to accurately detect your desired parking space.
- There must be a vehicle in front of or behind the space you want to park in.
Note
Autopark does not
operate on angled parking spaces.
To Use Autopark
When driving, follow these steps to allow Autopark to maneuver Cybertruck into a parking space:
- While driving slowly, monitor the
touchscreen (after making sure that
it is safe to do so) to see potential parking spaces detected by Autopilot.NoteThe detected parking spaces appear only if the vehicle's position and/or the circumstances of the surrounding area are such that Autopark can determine an appropriate driving path. If Autopark cannot determine an appropriate path (for example, when driving on a narrow street where moving into the parking space causes the front of the vehicle to extend into the adjacent lane), you can either reposition the vehicle, find a different parking space, or park manually.
- Choose a spot, then release the steering wheel and touch Start on the touchscreen.
- Autopark displays a message when parking is complete.
If you press the brake pedal when Autopark is actively parking Cybertruck, the parking process cancels.
CAUTION
Cybertruck does not brake if you
choose to override the current speed by pressing the accelerator pedal while
Autopark is active. In this case, Autopark cancels if you exceed 6 mph (10 km/h).
Warning
Never depend on
Autopark to find a parking space that is legal, suitable, and safe. Autopark may not
always detect objects in the parking space. Always perform visual checks to confirm
that a parking space is appropriate and safe.
Warning
When Autopark is
actively steering Cybertruck:
- Do not interfere with the movement of the steering wheel. Doing so cancels Autopark.
- Continually check your surroundings. Be prepared to apply the brakes to avoid vehicles, pedestrians, or objects.
- Monitor the touchscreen to ensure that you are aware of the instructions that Autopark is providing.
To Cancel Parking
Autopark cancels the parking sequence when:
- You manually move the steering wheel.
- You shift.
- You press the brake pedal.
- You press the right scroll button on the steering wheel.
- The parking sequence exceeds seven moves.
Take Over Immediately
In situations where Autopark is unable to steer Cybertruck, Autopark sounds a warning chime and displays the message Take Over Immediately.
This happens when:
- Cybertruck detects that a door is opened or that the driver is exiting the vehicle.
- One or more of the cameras is damaged, dirty, obstructed (such as by mud, ice, or snow, or by adhesive products such as wraps, stickers, etc.), or has poor visibility (due to heavy rain, snow, hail, etc. or poor lighting).
- Your speed exceeds 6 mph (10 km/h).
- An Automatic Emergency Braking event occurs (see Collision Avoidance Assist).
When you see this message, take over immediately.